How To - Visual Training
Replacing a paper roll in a TranScan® Cab/Trailer
Replacing a paper roll in a TranScan® Rigid
This guide explains how to replace a paper roll and make sure it is installed properly.
Either click on the thumbnail images below to see each step of the process, watch the video,
or download the handy pocket sized A5 instructions in pdf format.
How to Replace a Paper Roll in a TranScan® Cab/Trailer
- Open the cover to remove the remains of the old paper roll
(do not pull paper backwards through the printer as this may cause damage to the mechanism) - Load the new paper roll onto the holder and fit it
so that the paper feeds forward from the top of the roll. - Feed the leading edge of the paper into the slot at the bottom of the printer mechanism
(if necessary cut the paper at an angle to ease feeding). - Press either of the blue print buttons to operate the printer.
Ensure that the cartridge is located correctly and gives a clear print out. - Close the cover, tear off the ticket
- Press either of the blue print buttons.
Ensure that the cartridge is located correctly and gives a clear print out.
to watch the visual training please click the video above
How to Replace a Paper Roll in a TranScan® Rigid
- To release the tray press the cover, pull out the tray
and remove the cover by releasing the lip. - Remove and discard the old ribbon cartridge,
by pressing the right hand end of the cartridge (marked PUSH). - Load the new ribbon with the paper feeding between the cartridge and exposed ribbon.
- Replace the cover and close the tray.
- Close the cover, tear of the ticket.
- Press the blue print button to operate the printer.
Ensure that the paper is taken up by the printer mechanism.
to watch the visual training please click the video above
